Shining Wap4 (dead)SRC 22743, which hauled 12152 Samarsata exp, till IGP, was made dead, and Ajni WAP7 30310 attached to it, which hauled it till LTT, under newly converted AC region of KYN-TNA-LTT, is captured by Nitin Kumar, on a Fresh Early Morning on Jan 12, 2014, at Kalyan Jn (Nitin Kumar)
Date: 2014-01-12
Photo Properties
Summary Details
| Make | Canon | Model | Canon PowerShot SX150 IS |
| Aperture Value | f/3.4 | Color Space | sRGB |
| Exposure Bias Value | 0 EV | Flash | No Flash |
| Focal Length | 5 mm | ISO | 800 |
| Metering Mode | Multi-Segment | Shutter Speed Value | 1/5 sec |
| Digital Zoom Ratio | 1 | Date/Time | 2014 Jan 12 07:00:22 +0000 |
Recent comments
Hi Akshay
If the purpose was to bring AC locos to LTT for the next day's services I buy your logic. But that could have been done attaching the new AC locos at the rear of the train. I suppose there were more centimental issues than this. If we go...
Hi Akshay
If the purpose was to bring AC locos to LTT for the next day's services I buy your logic. But that could have been done attaching the new AC locos at the rear of the train. I suppose there were more centimental issues than this. If we go by your logic then other night/morning arrival must have faced similar changes. Are there any other example like this?
Posted by Avishek Basu on 2014 Jan 18 06:26:45 +0000
There is a simpler, operational possibility too. It would be much more complicated to remove the original loco, attach the additional dead loco to the rake and couple the original loco ahead of the newly attached loco again. Instead, simply attach the...
There is a simpler, operational possibility too. It would be much more complicated to remove the original loco, attach the additional dead loco to the rake and couple the original loco ahead of the newly attached loco again. Instead, simply attach the additional loco at the helm, make the original loco dead and haul the train with the new loco.
Posted by Akshay Marathe on 2014 Jan 17 10:40:57 +0000
Quite Possible !!! That would have been the main intention of CR.
Posted by Vijay Aravamudhan on 2014 Jan 17 06:54:53 +0000