WDM-2 No. 18978 model in O Scale built by Lloyd Pierce, photo #3. Photograph by Ajit Singh, 2003

Passing cabin 0-6-0 ST 707 NWR with coaches. Model and layout by Lloyd Pierce; photo by Ajit Singh, 2006.

Another angle of ST 707 Tank Loco with coaches. Model and layout by Lloyd Pierce; photo by Ajit Singh, 2006.

Model based on BNR K-Class "DeGlehn Compound". BUILDER: North British, Wheel Arrangement: 4-4-0. The loco is DCC equipped. Model and layout by Lloyd Pierce; photo by Ajit Singh, 2006.

Semaphore Signals in action- the signals are fully functional and are automatically latching to the way the points are set. The points are set via manual levers. A tortoise motor is used for each semaphore signal arm movement. I had a vision

A great view of the yard and points with
the BNR K-Class No. 1785 resting. Model and layout by Lloyd Pierce; photo by Ajit Singh, 2006.

ST 707 pulling a heavy load over a bridge.
Bridge built using plywood inner frames, covered
with sheet styrofoam which was scribed to model the brick walls. Model and layout by Lloyd Pierce; photo by Ajit Singh, 2006.

P 31652 Loco passing while K-Class No.1785 is
seen resting. Model and layout by Lloyd Pierce; photo by Ajit Singh, 2006.

One of three Brake Vans built on Marklin HO flat bed cars for a fellow enthusiast. Send your questions/requests
to lloyddapierce@yahoo.ca. August 2007.

The second of three Brake Vans built on Marklin HO flat bed cars for a fellow enthusiast. Send your questions/requests
to lloyddapierce@yahoo.ca. August 2007.

The third of three Brake Vans built on Marklin HO flat bed cars for a fellow enthusiast. Send your questions/requests
to lloyddapierce@yahoo.ca. August 2007.

DHR Loco 785 is scratch built "O" Scale Narrow Gauge model which runs on HO 16.5mm track.
Length of the loco is around 6", height about 3.5", and can take 15" curved radius track
The loco has complete working Walschaerts valve g

(Ajit Singh)

(Ajit Singh)

(Ajit Singh)