The capture that made my day. It is moments like these that I live for.
Hubli WDG4s come face to face with their respective trains at Udupi. (Y Anil Kumar)
Date: 2012-09-05
Photo Properties
Summary Details
| Make | Canon | Model | Canon PowerShot SX40 HS |
| Aperture Value | f/5.8 | Color Space | sRGB |
| Exposure Bias Value | 0 EV | Flash | No Flash |
| Focal Length | 127.70 mm | ISO | 100 |
| Metering Mode | Multi-Segment | Shutter Speed Value | 1/60 sec |
| Digital Zoom Ratio | 1 | Date/Time | 2012 Sep 05 17:06:12 +0000 |
Recent comments
nice capture!
Posted by Suprateem Bhattacherjee on 2012 Sep 16 05:45:44 +0000
The turn out is set for the siding only. Sri.Aasish is right in saying that 12020 would have entered loop if the points were set for the loop line.(motor operated points act as a pair only).It would have been very clearly seen if the other rail of...
The turn out is set for the siding only. Sri.Aasish is right in saying that 12020 would have entered loop if the points were set for the loop line.(motor operated points act as a pair only).It would have been very clearly seen if the other rail of the point towards the siding was captured too..
Posted by Sriraman Sampathkumar on 2012 Sep 11 17:20:35 +0000
IMHO, the turnout is not set from loop-line to main-line. Had that been the case then 12020 would have been admitted on loop line from main line. Please note that both the points in a pair are set either to normal or reverse.
Karan, if you...
IMHO, the turnout is not set from loop-line to main-line. Had that been the case then 12020 would have been admitted on loop line from main line. Please note that both the points in a pair are set either to normal or reverse.
Karan, if you are referring to the gap near the link rail (with a flange), then that gap is permanent and will remain like that, irrespective of postion of the point.
Posted by Ashish Kuvelkar on 2012 Sep 11 06:39:24 +0000